I picked this up for a good price on eBay last summer; it’s the 1980s 1/24 Esci kit boxed by Ertl in 1990. The kit is relatively basic but goes together well just needing a bit of filler in some small sink marks.
It’s the Porsche 935/77 as raced by Jacky Ickx in 1977 featuring the iconic Martini livery.
Main paint is all by airbrush – Tamiya X18 for the chassis\interior, X2 over XF2 undercoat for the bodywork and Vallejo Model Air florescent red on the front splitter. When dry the body was smoothed ready for decals using Novus polishing kit (as used by pinball machine restorers!) following the great advice to be found here: http://www.britmodeller.com/forums/index.php?/topic/234956647-matts-tips-for-painting-cars/
Decals went on OK considering the age of the kit, bit fragile in places. The decal instructions didn’t always match the numbers on the sheet or what is on the box art. Pictures of the real car on the internet in period show different sponsor decal positions from race to race so final layout is my best effort at a representative scheme; this left me missing the ‘Martini Porsche’ wording across the front; I printed one on some decal paper I had lying around. With the benefit of hindsight I could have used the rear wing wording on the front as I found a picture of the car with only the Martini logo on the wing at a particular race.
After decalling, 2 coats of Tamyia gloss varnish X22 were airbrushed on to seal everything down. Window surrounds are done with permanent marker.
The Porsche 917 in some of the pictures is the Fujimi kit I finished last year; more of that build here: http://blog.cjhm.net/124-fujimi-porsche-917k-1971-1000km-monza